Acrylic Signs

Acrylic Signs Printing For Versatile Wall Art

Clear Acrylic Signs offer a durable and versatile solution for to draw attention. Acrylic boasts a variety of high-performance properties, among the most important being its optical clarity, low UV sensitivity, and overall weather resistance. Acrylic offers clear, glass-like brilliance and translucence, but is much lighter and much more durable than glass.

Finishing Options Available – We have Optional finish Options – 3/8″ Drill Hole with hole placement 1 inch from each corner, Rounded or Straight Corners, Contour Cuts (Custom Shape) , 5/8″ X 1″ Stand Off hardware and Sizes offered range from 6″ X 6″ to 46″ X 36

Contour Cut – for your Custom shape Cutting around the edge of an image following the outer edge (contour) of the your design.

FAQs:

How do I set up my Acrylic Signs artwork file?

Printed Side : Color Front Only – Artwork must be reversed prior to submission.
* Ensure you have 0.5″ bleed on all sides of your artwork.
* Do not add crop marks.
Note: Since Color Front Only is printed without a White Mask and is printed directly on the material, the image will have somewhat of a transparent appearance due to the Clear substrate.

Printed Side : Front Only With White Mask – Artwork must be reversed prior to submission.
* Ensure you have 0.5″ bleed on all sides of your artwork.
* Do not add crop marks.
White ink can be used as an overprint so your printed graphic can be opaque in some areas and transparent in others. This will allow for vibrant, crisp color. Make sure to create your mask file the same size as your color art file. This will prevent alignment issues during printing.

Note: White Masks must be made in vector format and be saved as EPS or PDF and use 100% K.
Use vector paths/shapes to create black color areas that will indicate where the white ink base will go. The rest of the area will represent the Acrylic Sign.
* White ink base will be printed behind any color that’s in your Artwork Layer.
* Areas with color but without a White Mask will be printed with color directly on the material. These areas will have somewhat transparent color due to the Clear substrate.
* Areas with color and a White Mask will be printed as opaque or solid color.
* Areas with a White Mask and no color will be printed as white.
* The black for the White Mask file must be 0% C 0% M 0% Y 100% K or it will not be recognized by preflight.

Can I use the Acrylic Signs Outdoors?

Yes. They are suitable for both indoor and outdoor usage. We recommend testing before using outdoors.

Are there any mounting options available?

Yes. 5/8″ X 1″ Stand Off hardware is available, but be sure to select “drill hole options” so that the hardware can be installed.

Can I get my acrylic signs Custom Shape or die-cut into specific shapes?

Yes. Offering Rounded or Straight Corners,for Custom Die-cut shapes use Contour Cut option.

How are the Acrylic Signs Printed?

UV cured inks are used to print directly on to the surface of the Acrylic making the product last longer outdoors.